|
A suitable sized opening in the floor should
be formed to house the drain unit. Our illustration shows the
Fundo being installed flush to the surrounding floor. It is also
possible to use Tilebacker to offer added benefits. See "In Concrete 2" for details.
The existing sub-floor should be completely clean.
Connect the coupling spigot of the drain to
the existing drainage pipework.
Site the drain unit in the exact location for
both height and position for later connection to the Fundo base
element (see right). Check all joints are tightened.
Fill the void around the drain and pipework
with a suitable mortar. Compress and level out the whole area
to the top of the drain body (right).
Now follow the instructions for finishing
the installation
|
