|
There are situations where it is appropriate to
use wedi Tilebacker board to cover the whole floor area. This
may be because of the condition of an existing floor or where
the heat insulating properties of Tilebacker are important
for the performance of the completed tiled area.
In this case, a smaller aperture is required.
Site the drain unit in the exact location for
both height and position for later connection to the Fundo base
element. Check all joints are tightened.
Fill the void around the drain and pipework
with a suitable mortar. Compress and level out the whole area
to the top of the drain body.
Follow the instructions for finishing
the installation.
|
|
